KIF22 promotes multiple myeloma progression by regulating the CDC25C/CDK1/cyclinB1 pathway.

PURPOSE: Multiple myeloma (MM) is an incurable hematological malignancy characterized by clonal proliferation of malignant plasma B cells in bone marrow, and its pathogenesis remains unknown. The aim of this study was to determine the role of kinesin family member 22 (KIF22) in MM and elucidate its molecular mechanism. METHODS: The expression of KIF22 was detected in MM patients based upon the public datasets and clinical samples. Then, in vitro assays were performed to investigate the biological function of KIF22 in MM cell lines, and subcutaneous xenograft models in nude mice were conducted in vivo. Chromatin immunoprecipitation (ChIP) and luciferase reporter assay were used to determine the mechanism of KIF22-mediated regulation. RESULTS: The results demonstrated that the expression of KIF22 in MM patients was associated with several clinical features, including gender (P = 0.016), LDH (P < 0.001), ß2-MG (P = 0.003), percentage of tumor cells (BM) (P = 0.002) and poor prognosis (P < 0.0001). Furthermore, changing the expression of KIF22 mainly influenced the cell proliferation in vitro and tumor growth in vivo, and caused G2/M phase cell cycle dysfunction. Mechanically, KIF22 directly transcriptionally regulated cell division cycle 25C (CDC25C) by binding its promoter and indirectly influenced CDC25C expression by regulating the ERK pathway. KIF22 also regulated CDC25C/CDK1/cyclinB1 pathway. CONCLUSION: KIF22 could promote cell proliferation and cell cycle progression by transcriptionally regulating CDC25C and its downstream CDC25C/CDK1/cyclinB1 pathway to facilitate MM progression, which might be a potential therapeutic target in MM.

Therapeutic and fluorescence evaluation of 20% 5-aminolevulinic acid-mediated photodynamic therapy in actinic keratosis.

BACKGROUND: Actinic keratosis (AK) is a precancerous lesion that occurs in areas that are chronically exposed to sunlight and has the potential to develop into invasive cutaneous squamous cell carcinoma (cSCC). We investigated the efficacy of 20% 5-aminolevulinic acid-photodynamic therapy (ALA-PDT) with LED red light for the treatment of AK in Chinese patients by examining changes in dermoscopic features, histopathology and fluorescence after treatment. METHODS: Twenty-eight patients with fourty-six AK lesions from March 2022 to September 2023 were treated with 20% ALA, and 3 hours later, they were irradiated with LED red light (80-100 mW/cm2) for 20 minutes. A session of 20% ALA-PDT was performed once a week for three consecutive weeks, and the dermoscopic, histopathological, fluorescent and photoaging outcomes were measured one week after the treatment. RESULTS: One week after ALA-PDT, complete remission (CR) was reached in 53.6% of patients. The CR of Grade I AK lesions was 100%, that of Grade II lesions was 71.4%, and that of Grade III lesions was 38.1%. There was a significant improvement in the dermoscopic features, epidermal thickness and fluorescence of the AK lesions. The presence of red fluorescence decreased, and there was an association between CR and post-PDT fluorescence intensity. ALA-PDT also exhibited efficacy in treating photoaging, including fine lines, sallowness, mottled pigmentation, erythema, and telangiectasias, and improved the global score for photoaging. There were no serious adverse effects during or after ALA-PDT, and 82.1% of the patients were satisfied with the treatment. CONCLUSION: AK lesions can be safely and effectively treated with 20% ALA-PDT with LED red light, which also alleviates photoaging in Chinese patients, including those with multiple AKs. This study highlights the possibility that fluorescence could be used to diagnose AK with peripheral field cancerization and evaluate the efficacy of ALA-PDT.

BATF promotes extramedullary infiltration through TGF-ß1/Smad/MMPs axis in acute myeloid leukemia.

Acute myeloid leukemia (AML) is one of the most prevalent types of leukemia and is challenging to cure for most patients. Basic Leucine Zipper ATF-Like Transcription Factor (BATF) has been reported to participate in the development and progression of numerous tumors. However, its role in AML is largely unknown. In this study, the expression and prognostic value of BATF were examined in AML. Our results demonstrated that BATF expression was upregulated in AML patients, which was significantly correlated with poor clinical characteristics and survival. Afterward, functional experiments were performed after knocking down or overexpressing BATF by transfecting small interfering RNAs and overexpression plasmids into AML cells. Our findings revealed that BATF promoted the migratory and invasive abilities of AML cells in vitro and in vivo. Moreover, the target genes of BATF were searched from databases to explore the binding of BATF to the target gene using ChIP and luciferase assays. Notably, our observations validated that BATF is bound to the promoter region of TGF-ß1, which could transcriptionally enhance the expression of TGF-ß1 and activate the TGF-ß1/Smad/MMPs signaling pathway. In summary, our study established the aberrantly high expression of BATF and its pro-migratory function via the TGF-ß1-Smad2/3-MMP2/9 axis in AML, which provides novel insights into extramedullary infiltration of AML.

Outcomes in patients with multiple myeloma receiving salvage treatment after BCMA-specific CAR-T therapy: A retrospective analysis of LEGEND-2.

Chimeric antigen receptor T-cell (CAR-T) therapy targeting B-cell maturation antigen (BCMA) has shown profound efficacy and manageable toxicity in patients with relapsed/refractory multiple myeloma (RRMM). However, determining the best course of treatment for post-CAR-T therapy relapse remains a significant challenge. We conducted a retrospective analysis of patients from the phase I LEGEND-2 study (NCT03090659) enrolled at the Xi'an site, analysing the first salvage line of therapy and outcomes in patients with RRMM who progressed after receiving LCAR-B38M CAR-T therapy. Of 45 eligible patients, 34 (76%) had progressive disease (PD). Overall response rate (ORR) to salvage treatment was 50.0%. Median progression-free survival (PFS) after starting salvage treatment was 16.3 months. Median PFS of patients receiving proteasome inhibitor (PI)-based combination therapy was longer (28.2 months) than that of patients receiving a second BCMA CAR-T (including LCAR-B38M; 3.9 months, p = 0.0022) or chemotherapy (1.67 months, p = 0.0001). All patients with extramedullary disease at baseline (n = 11) progressed after CAR-T therapy; ORR to salvage therapy was 25.0% and median PFS was 9.7 months. In conclusion, salvage therapy in patients with PD after receiving LCAR-B38M CAR-T cells produced moderate efficacy, with better outcomes for PI-based salvage regimens.

MiR-223-3p overexpressed adipose mesenchymal stem cell-derived exosomes promote wound healing via targeting MAPK10.

BACKGROUND: Adipose mesenchymal stem cell (AMSC)-derived exosomes are promising novel factors for wound repair and regeneration. This study aimed to explore the potential roles and underlying mechanisms of specific miRNA in wound healing using AMSC-derived exosomes as carriers. METHODS: The expression profiles of GSE197840 were downloaded to screen for differentially expressed miRNAs (DEmiRNAs), and the corresponding genes of the identified miRNAs were predicted. Next, miRNA-mRNA co-expression networks were constructed and the genes in these networks were subjected to functional analysis. miR-223-3p overexpressed AMSCs were then established to isolate exosomes, and the effects of AMSC-derived exosomes carrying miR-223-3p on wound healing and the related potential mechanisms were further investigated in vivo. RESULTS: 35 DEmiRNAs were identified and a co-expression network containing 22 miRNAs and 91 target genes was constructed. Based on the network, miR-223-3p was the hub node and the genes were significantly enriched in 15 GO terms of biological processes and 14 KEGG pathways, including cAMP, PI3K-Akt, cGMP-PKG, neurotrophin signaling pathway, and dopaminergic synapse. Then, miR-223-3p overexpressed AMSCs-derived exosomes were successfully extracted, and miR-223-3p was found to directly bind with MAPK10. In vivo experiments validated that AMSCs-derived exosomal miR-223-3p could promote wound healing, and up-regulated α-SMA, CD31, COL1A1, COL2A1, COL3A1, and down-regulated MAPK10, TNF-α, IL-ß, and IL-6. CONCLUSIONS: AMSC-derived exosomal miR-223-3p may accelerate wound healing by targeting MAPK10.

Real-world results of venetoclax combined with hypomethylating agents in young adults with relapsed/refractory acute myeloid leukemia.

OBJECTIVES: Young adults with acute myeloid leukemia (AML) often fail to achieve permanent complete remission (CR) and frequently relapse, indicating an urgent need to explore effective salvage therapies. Recent advances in AML treatment have been attributed to the combination of the B-cell lymphoma 2 (Bcl-2) inhibitor venetoclax (VEN) with hypomethylating agents (HMAs); however, the use of this combination in young adults with relapsed or refractory (R/R) AML has not been reported. METHODS: We retrospectively examined 31 young patients with R/R AML treated with VEN plus an HMA. We evaluated the demographic data, cytogenetic characteristics, AML types, response rates, and transplantation-related data for the patients in our cohort. RESULTS: The combination of VEN + HMA yielded a CR rate of 48.4%. The most prominent hematologic adverse event was neutropenia, which occurred in all patients, with 90.3% of cases being grade ≥3. Non-hematologic toxicities were relatively mild and infrequent, with an incidence of 45.2%. More than half of the patients with sustained CR had received an allogeneic hematopoietic stem cell transplantation (allo-HSCT), of whom two died of transplant-related complications. CONCLUSION: Our results showed that the combination of VEN + HMA appeared to be a highly effective and well-tolerated salvage therapy option for young patients with R/R AML, enabling more young patients to proceed to potentially curative allo-HSCT. However, additional, well-designed studies with larger numbers of patients are required to confirm the advantages of VEN + HMA in this population.

N6-methyladenosine reader YTHDF2 promotes multiple myeloma cell proliferation through EGR1/p21cip1/waf1/CDK2-Cyclin E1 axis-mediated cell cycle transition.

Multiple myeloma (MM) is the second most common hematological malignancy. N6-methyladenosine (m6A) is the most abundant RNA modification. YTH domain-containing family protein 2 (YTHDF2) recognizes m6A-cotaining RNAs and accelerates degradation to regulate cancer progression. However, the role of YTHDF2 in MM remains unclear. We investigated the expression levels and prognostic role of YTHDF2 in MM, and studied the effect of YTHDF2 on MM proliferation and cell cycle. The results showed that YTHDF2 was highly expressed in MM and was an independent prognostic factor for MM survival. Silencing YTHDF2 suppressed cell proliferation and caused the G1/S phase cell cycle arrest. RNA immunoprecipitation (RIP) and m6A-RIP (MeRIP) revealed that YTHDF2 accelerated EGR1 mRNA degradation in an m6A-dependent manner. Moreover, overexpression of YTHDF2 promoted MM growth via the m6A-dependent degradation of EGR1 both in vitro and in vivo. Furthermore, EGR1 suppressed cell proliferation and retarded cell cycle by activating p21cip1/waf1 transcription and inhibiting CDK2-cyclinE1. EGR1 knockdown could reverse the inhibited proliferation and cell cycle arrest upon YTHDF2 knockdown. In conclusion, the high expression of YTHDF2 promoted MM cell proliferation via EGR1/p21cip1/waf1/CDK2-cyclin E1 axis-mediated cell cycle transition, highlighting the potential of YTHDF2 as an effective prognostic biomarker and a promising therapeutic target for MM.

A novel ferroptosis-related gene signature for predicting prognosis in multiple myeloma.

Background: Multiple myeloma (MM) is a highly malignant hematological tumor with a poor overall survival (OS). Due to the high heterogeneity of MM, it is necessary to explore novel markers for the prognosis prediction for MM patients. Ferroptosis is a form of regulated cell death, playing a critical role in tumorigenesis and cancer progression. However, the predictive role of ferroptosis-related genes (FRGs) in MM prognosis remains unknown. Methods: This study collected 107 FRGs previously reported and utilized the least absolute shrinkage and selection operator (LASSO) cox regression model to construct a multi-genes risk signature model upon FRGs. The ESTIMATE algorithm and immune-related single-sample gene set enrichment analysis (ssGSEA) were carried out to evaluate immune infiltration level. Drug sensitivity was assessed based on the Genomics of Drug Sensitivity in Cancer database (GDSC). Then the synergy effect was determined with Cell counting kit-8 (CCK-8) assay and SynergyFinder software. Results: A 6-gene prognostic risk signature model was constructed, and MM patients were divided into high and low risk groups. Kaplan-Meier survival curves showed that patients in the high risk group had significantly reduced OS compared with patients in the low risk group. Besides, the risk score was an independent predictor for OS. Receiver operating characteristic (ROC) curve analysis confirmed the predictive capacity of the risk signature. Combination of risk score and ISS stage had better prediction performance. Enrichment analysis revealed immune response, MYC, mTOR, proteasome and oxidative phosphorylation were enriched in high risk MM patients. We found high risk MM patients had lower immune scores and immune infiltration levels. Moreover, further analysis found that MM patients in high risk group were sensitive to bortezomib and lenalidomide. At last, the results of the in vitro experiment showed that ferroptosis inducers (RSL3 and ML162) may synergistically enhance the cytotoxicity of bortezomib and lenalidomide against MM cell line RPMI-8226. Conclusion: This study provides novel insights into roles of ferroptosis in MM prognosis prediction, immune levels and drug sensitivity, which complements and improves current grading systems.

A mini-review on the dielectric properties of cellulose and nanocellulose-based materials as electronic components.

Cellulose-based materials have the advantages of renewable, non-toxic, flexible, and strong mechanical properties, so it of is great significance to study the dielectric properties of cellulose-based materials. In this paper, we summarized the factors influencing the dielectric properties of cellulose and nanocellulose-based dielectric and the ways to change the dielectric properties, mainly exploring the methods to improve the dielectric constant of cellulose-based dielectric materials. Cellulose and nanocellulose-based dielectric need to improve the hygroscopic property, increase the flexibility and reduce dielectric loss of the composite materials. This review summarizes the current state-of-art progress of new dielectric materials for green energy storage and flexible electronic devices.

Long-term potentiation and depression regulatory microRNAs were highlighted in Bisphenol A induced learning and memory impairment by microRNA sequencing and bioinformatics analysis.

The mechanisms of Bisphenol A (BPA) induced learning and memory impairment have still not been fully elucidated. MicroRNAs (miRNAs) are endogenous non-coding small RNA molecules involved in the process of toxicant-induced neurotoxicity. To investigate the role of miRNAs in BPA-induced learning and memory impairment, we analyzed the impacts of BPA on miRNA expression profile by high-throughput sequencing in mice hippocampus. Results showed that mice treated with BPA displayed impairments of spatial learning and memory and changes in the expression of miRNAs in the hippocampus. Seventeen miRNAs were significantly differentially expressed after BPA exposure, of these, 13 and 4 miRNAs were up- and downregulated, respectively. Bioinformatic analysis of Gene Ontology (GO) and pathway suggests that BPA exposure significantly triggered transcriptional changes of miRNAs associated with learning and memory; the top five affected pathways involved in impairment of learning and memory are: 1) Long-term depression (LTD); 2) Thyroid hormone synthesis; 3) GnRH signaling pathway; 4) Long-term potentiation (LTP); 5) Serotonergic synapse. Eight BPA-responsive differentially expressed miRNAs regulating LTP and LTD were further screened to validate the miRNA sequencing data using Real-Time PCR. The deregulation expression levels of proteins of five target genes (CaMKII, MEK1/2, IP3R, AMPAR1 and PLCß4) were investigated via western blot, for further verifying the results of gene target analysis. Our results showed that LTP and LTD related miRNAs and their targets could contribute to BPA-induced impairment of learning and memory. This study provides valuable information for novel miRNA biomarkers to detect changes in impairment of learning and memory induced by BPA exposure.

Carbon Dots Embedded in Cellulose Film: Programmable, Performance-Tunable, and Large-Scale Subtle Fluorescent Patterning by in Situ Laser Writing.

Fluorescent patterns with multiple functions enable high-security anti-counterfeiting labels. Complex material synthesis and patterning processes limit the application of multifunctional fluorescent patterns, so the technology of in situ fluorescent patterning with tunable multimodal capabilities is becoming more necessary. In this work, an in situ fluorescent patterning technology was developed using laser direct writing on solid cellulose film at ambient conditions without masks. The fluorescent intensity and surface microstructure of the patterns could be adjusted by programmable varying of the laser parameters simultaneously. During laser direct writing, carbon dots are generated in situ in a cellulose ester polymer matrix, which significantly simplifies the fluorescent patterning process and reduces the manufacturing cost. Interestingly, the tunable fluorescent intensity empowers the fabrication of visual stereoscopic fluorescent patterns with excitation dependence, further improving its anti-counterfeiting performance. The obtained fluorescent patterns still show ultrahigh optical properties after being immersed in an acid/base solution (pH 5-12) over one month. In addition, the anti-UV performance of the obtained laser-patterned film with transmittance around 90% is comparable to that of commercial UV-resistant films. This work provided an advanced and feasible approach to fabricating programmable, performance-tunable, subtle fluorescent patterns in large-scale for industrial application.

Serum vitamin E levels and chronic inflammatory skin diseases: A systematic review and meta-analysis.

BACKGROUND: Vitamin E has long been linked to skin health, including all of its possible functions in cosmetic products, to its roles in membrane integrity and even the aging process. However, reports on the relationship between serum vitamin E levels and the risk of chronic inflammatory skin diseases have been inconsistent. We performed a systematic review and meta-analysis to evaluate the association between serum vitamin E levels and chronic inflammatory skin diseases. METHODS: We searched the PubMed, Web of Science and Scopus databases, with no time limit up to 30.06.2021. Studies examining serum vitamin E levels in patients with chronic inflammatory skin diseases were selected. RESULTS: Twenty articles met the inclusion criteria. Compared with controls, a lower vitamin E level was found in patients with vitiligo (SMD: -0.70, 95% CI: -1.21 to -0.19), psoriasis (SMD: -2.73, 95% CI: -3.57 to -1.18), atopic dermatitis (SMD: -1.08, 95% CI: -1.80 to -0.36) and acne (SMD: -0.67, 95% CI: -1.05 to -0.30). CONCLUSIONS: Our meta-analysis showed that serum vitamin E levels were lower in patients suffering from vitiligo, psoriasis, atopic dermatitis and acne. This study highlights the need to evaluate vitamin E status to improve its level in patients with skin diseases.

Recent Advances on Cellulose Nanocrystals and Their Derivatives.

Nanocellulose, typically cellulose nanocrystals (CNCs), has excellent properties and is widely used. In particular, CNC has a small dimension, high chemical reactivity, and high sustainability, which makes it an excellent candidate as a starting material to be converted into nanocellulose derivatives. Chemical modification is essential for obtaining the desired products; the modifications create different functional attachment levels and generate novel microstructures. Recent advances on nanocellulose derivatives have not yet been reviewed and evaluated for the last five years. Nanocellulose derivative materials are being used in a wide variety of high-quality functional applications. To meet these requirements, it is essential for researchers to fully understand CNCs and derivative materials, precisely their characteristics, synthesis methods, and chemical modification approaches. This paper discusses CNC and its derivatives concerning the structural characteristics, performance, and synthesis methods, comparing the pros and cons of these chemical modification approaches reported in recent years. This review also discusses the critical physicochemical properties of CNC derivative products, including solubility, wetting performance, and associated impacts on properties. Lastly, this paper also comments on the bottlenecks of nanocellulose derivatives in various applications and briefly discusses their future research direction.

Electrospun, sepiolite-loaded poly(vinyl alcohol)/soy protein isolate nanofibers: Preparation, characterization, and their drug release behavior.

Wound management and drug release are important applications for electrospun nanofibers. In this study, poly(vinyl alcohol)/soy protein isolate (PVA/SPI) nanofiber mats were produced by electrospinning and used as drug carriers. The mats were loaded with ketoprofen by dissolving the drug in the solutions for nanofiber electrospinning. To improve drug release control of the nanofiber mats, a natural tubular nanoparticle, sepiolite, was used as a secondary release control tool. Three types of nanofiber mats were fabricated by electrospinning the solutions prepared by 1) direct mixing of PVA, SPI, and ketoprofen, 2) direct mixing of PVA, SPI, sepiolite, and ketoprofen, and 3) mixing PVA, SPI, and ketoprofen-preloaded sepiolite. The drug release behavior of the mats was studied using UV-vis spectroscopy and the mechanical properties of the mats were investigated by tensile testing. The results showed that sepiolite had a high impact on the release of ketoprofen, with the drug-loaded sepiolite leading to the slowest release. The incorporation of SPI and sepiolite into the PVA nanofibers also increased the mechanical strength of the mats, making them easier to handle and potentially longer-lasting. This study demonstrated the potential of using natural biomaterials and nanomaterials as the components of controlled-release drug delivery vehicles.

Highly UV Resistant Inch-Scale Hybrid Perovskite Quantum Dot Papers.

Halide perovskite quantum dots (PQDs) are promising materials for diverse applications including displays, light-emitting diodes, and solar cells due to their intriguing properties such as tunable bandgap, high photoluminescence quantum yield, high absorbance, and narrow emission peaks. Despite the prosperous achievements over the past several years, PQDs face severe challenges in terms of stability under different circumstances. Currently, researchers have overcome part of the stability problem, making PQDs sustainable in water, oxygen, and polar solvents for long-term use. However, halide PQDs are easily degraded under continuous irradiation, which significantly limits their potential for conventional applications. In this study, an oleic acid/oleylamine (traditional surface ligands)-free method to fabricate perovskite quantum dot papers (PQDP) is developed by adding cellulose nanocrystals as long-chain binding ligands that stabilize the PQD structure. As a result, the relative photoluminescence intensity of PQDP remains over ≈90% under continuous ultraviolet (UV, 16 W) irradiation for 2 months, showing negligible photodegradation. This proposed method paves the way for the fabrication of ultrastable PQDs and the future development of related applications.

Photonic Thin Films Assembled from Amphiphilic Cellulose Nanofibrils Displaying Iridescent Full-Colors.

Self-assembly of nanoparticles (NPs) to form structural colors offers promising opportunities for developing electronic, optoelectronic, and magnetic devices. In this regard, we reported co-assembly of cellulose nanofibrils (CNFs) and graphene to produce colored thin films. We demonstrated that biomimetic iridescent "peacock feather"-like full-color thin films can be generated by simple evaporation of aqueous suspensions on a surface tension confined, optically symmetric indium tin oxide-coated polyethylene terephthalate substrate. Amphiphilic CNFs serve dual functions to attract hydrophobic graphene via van der Waals interactions and to disperse hydrophilically and anionically CNF-tethered graphene while regulating surface tension to induce capillary and Marangoni flows in the force fields and construct thickness variation during dewetting. These CNF-graphene thin films exhibit full-color patterns and function as tunable light and moisture actuators. This approach has high potential to be applied to assemble other metal or metal oxide NPs for fast, simple, and robust fabrication without involving any complex lithography and external fields.

Highly Efficient and Stable White Light-Emitting Diodes Using Perovskite Quantum Dot Paper.

Perovskite quantum dots (PQDs) are a competitive candidate for next-generation display technologies as a result of their superior photoluminescence, narrow emission, high quantum yield, and color tunability. However, due to poor thermal resistance and instability under high energy radiation, most PQD-based white light-emitting diodes (LEDs) show only modest luminous efficiency of ≈50 lm W-1 and a short lifetime of <100 h. In this study, by incorporating cellulose nanocrystals, a new type of QD film is fabricated: CH3NH3PbBr3 PQD paper that features 91% optical absorption, intense green light emission (518 nm), and excellent stability attributed to the complexation effect between the nanocellulose and PQDs. The PQD paper is combined with red K2SiF6:Mn4+ phosphor and blue GaN LED chips to fabricate a high-performance white LED demonstrating ultrahigh luminous efficiency (124 lm W-1), wide color gamut (123% of National Television System Committee), and long operation lifetime (240 h), which paves the way for advanced lighting technology.

Transition of interfacial capacitors in electrowetting on a graphite surface by ion intercalation.

The low voltage electrowetting response of a LiCl aqueous solution on a freshly cleaved surface of highly oriented pyrolytic graphite (HOPG) is presented. For applied voltages below 1 V, the energy stored in the electrical double layer (EDL) is insufficient to drive the spreading of the drop due to the pinning of the three phase contact line at the step edges. Electrochemical impedance spectroscopy shows a dramatic increase in capacitance above 1 V, which provides a sufficient electrowetting force for depinning the contact line, resulting in a subsequent decrease of the contact angle. The transition of the interfacial capacitance from the EDL to the many-fold high capacitance of the pseudocapacitor drives the electrowetting transition on the HOPG surface. The observed changes in the capacitances above 1 V are correlated with the cyclic voltammetry and atomic force microscopy results, which show that the Cl- ions intercalate into the graphite galleries upon acquiring sufficient energy to overcome the van der Waals attraction between the graphene layers through the side of the step edge of the basal planes. To the best of our knowledge, this is the first study on the voltage dependent intercalation mediated transition of interfacial capacitance driving the spreading of an aqueous electrolyte drop on the HOPG surface, which provides a fundamental understanding of the mechanism and opens up potential applications in microfluidics and charge storage technologies.

FoxO1 controls the expansion of pre-B cells by regulating the expression of interleukin 7 receptor α chain and its signal pathway.

Forkhead box O1 (FoxO1) has a crucial role in the early B cell development. To understand the functional importance of FoxO1 gene in the early B cell expansion, we established a FoxO1 knockdown model using 70Z/3 pre-B cell line. The FoxO1 knockdown 70Z/3 cells (70Z/3-KD cells) showed the down-regulated expression of interleukin 7 receptor α chain (IL-7Rα). Moreover, the signaling via IL-7Rα was significantly attenuated in the 70Z/3-KD cells, and this alteration was fully rescued by re-expression of FoxO1 gene. Compared to the mock cells, loss of FoxO1 reduced the growth rates in the 70Z/3-KD cells, and was fully rescued by reintroduction of FoxO1 gene. The expansion of pre-B cells (CD45R+CD43- fraction) was also reduced by the knockdown of FoxO1 gene. Indeed, FoxO1 induces accumulation in the p27-mediated G0/G1 phase arrest in 70Z/3 cells. FoxO1 bound to the Il7ra locus specifically and regulate the IL-7Rα transcription. In conclusion, FoxO1 regulates the expansion of pre-B cells by regulating the expression of IL-7Rα and its signal transduction.

Aqueous exfoliated graphene by amphiphilic nanocellulose and its application in moisture-responsive foldable actuators.

Graphene is a promising material for diverse applications, such as in composites, optoelectronics, photovoltaic cells, and energy storage devices. However, high-yielding liquid exfoliation of good-quality graphene in high concentrations remains a challenge. In this study, amphiphilic 2,2,6,6-tetramethylpiperidin-1-yl-oxyl (TEMPO)-mediated cellulose nanofibrils (CNFs) were demonstrated in robust aqueous exfoliation of graphite into high quality graphene in high yields and stable dispersions with graphene concentration up to 1 mg mL-1. Over 50% of graphene flakes exfoliated were 3 layers or less, of which ca. 5% were monolayer, and another 47% were multilayers, leaving only 3% as un-exfoliated graphitic platelets. Outstanding yields up to 84.2% were achieved at an optimized 0.2 g g-1 graphite : CNF feed ratio. The dispersed graphitic flakes are stabilized by Coulomb repulsion from the surface bound charged CNFs. Aqueous graphene suspensions stabilized by CNFs were easily vacuum filtered into nanopapers that exhibited rapid moisture triggered motion and spontaneous recovery in the absence of moisture, resembling actions of biological motor cells in "shame plant" leaves. Such unique moisture responsive behavior is attributed to the highly accessible, charged CNF surfaces and the recovery is due to the inherently hydrophobic graphene. This facile aqueous exfoliating approach using amphiphilic CNFs as multi-functional exfoliating, dispersing and structural-forming agents for moisture-responsive graphene nanopaper opens up a large-area of potential applications toward biologically inspired sensors and actuators.